| Property | Value |
|---|---|
| Hex Value | $E7 |
| Categories | |
| Localizations |
|
Send(
Overview
Sends one or more TI-Innovator™ Hub commands to a connected hub. Notes: See also eval( and Get( command related to the Send( command. TI-Innovator™ Hub commands are supported in the HUB submenu in the CE OS v.5.2 program editor.
Availability: Token only available from within the Basic editor.
Syntax
Send(string)
Arguments
| Name | Type | Optional |
|---|---|---|
| string | string |
Location
prgm, I/O, B:Send(
Overview
Sends one or more TI-Innovator™ Hub commands to a connected hub. Notes: See also eval( and Get( command related to the Send( command. TI-Innovator™ Hub commands are supported in the HUB submenu in the CE OS v.5.2 program editor.
Availability: Token only available from within the Basic editor.
Syntax
Send(string)
Arguments
| Name | Type | Optional |
|---|---|---|
| string | string |
Location
prgm, HUB
Description
The Send( command is used for sending data to a CBL (Calculator Based Laboratory) device (or another compatible device) via a link cable. With some exceptions, Send('s argument must be a variable: a real number, list, matrix, string, equation, picture, or GDB. An expression or a number will not work — Send(5) or Send([A][B]) is invalid.
The exceptions are list or matrix elements (that is, you can do Send(A) or Send(L1(2)) without an error) and non-variable lists typed out with { } brackets and commas.
Norland Robot
You can use Send( with a Get( for a Norland calculator robot. The format called CLR format. C stands for command number, L stands for left axle, and R stands for right axle. If the command number is 1, it makes the robot moves in a direction for the time specified later in the command. If it is 2, the robot moves until the bumper hits a wall. If it is 3, it moves for a specified amount of time and stops when the robot when the bumper hits a wall. For example, send({122,100}) will make the robot move forward for 100 centiseconds, send({222}) makes it go forward until the bumper hits the wall, and send({322,100}) makes the robot move forward for 100 centiseconds and stops it when the bumper is pressed. The last two axle control numbers are like this:
0=backwards
1=stop
2=forwards
Related Commands
Source: parts of this page were written by the following TI|BD contributors: burr, DarkerLine, GoVegan, jonbush, princetonlion.
History
| Calculator | OS Version | Description |
|---|---|---|
| TI-82 | 1.0 | Added |
Created: February 23, 2023 23:15:01