| Property | Value |
|---|---|
| Hex Value | $BB3C |
| Categories | |
| Localizations |
|
T-Test
Overview
Performs a t test with frequency freqlist. alternative=-1 is <; alternative=0 is ≠; alternative=1 is >. drawflag=1 draws results; drawflag=0 calculates results.
Color#: 10 - 24 or color name pasted from [vars] COLOR.
Comment:Data list input
Availability: Token only available from within the Basic editor.
Syntax
T-Test μ0[,listname,freqlist,alternative,drawflag,color#])
Arguments
| Name | Type | Optional |
|---|---|---|
| μ | ||
| 0 | Yes | |
| listname | list | Yes |
| freqlist | list | Yes |
| alternative | Yes | |
| drawflag | Yes | |
| color# | colorNum | Yes |
Location
stat, TESTS, 2:T-Test
Overview
Performs a t test with frequency freqlist. alternative=-1 is < ; alternative=0 is Ä; alternative=1 is >. drawflag=1 draws results; drawflag=0 calculates results.
Color#: 10 - 24 or color name pasted from [vars] COLOR.
Availability: Token only available from within the Basic editor.
Syntax
T-Test μ0,x̄,Sx,n[,alternative,drawflag,color#])
Arguments
| Name | Type | Optional |
|---|---|---|
| μ | ||
| 0 | ||
| x̄ | ||
| Sx | ||
| n | Yes | |
| alternative | Yes | |
| drawflag | Yes | |
| color# | colorNum | Yes |
Location
stat, TESTS, 2:T-Test
Description
T-Test performs a t significance test of a null hypothesis you supply. This test is valid for simple random samples from a population with an unknown standard deviation. In addition, either the population must be normally distributed, or the sample size has to be sufficiently large.
The logic behind a T-Test is as follows: we want to test the hypothesis that the true mean of a population is a certain value (μ0). To do this, we assume that this "null hypothesis" is true, and calculate the probability that the variation from this mean occurred, under this assumption. If this probability is sufficiently low (usually, 5% is the cutoff point), we conclude that since it's so unlikely that the data could have occurred under the null hypothesis, the null hypothesis must be false, and therefore the true mean μ is not equal to μ0. If, on the other hand, the probability is not too low, we conclude that the data may well have occurred under the null hypothesis, and therefore there's no reason to reject it.
In addition to the null hypothesis, we must have an alternative hypothesis as well - usually this is simply that the true mean is not μ0. However, in certain cases when we have reason to suspect the true mean is less than or greater than μ0, we might use a "one-sided" alternative hypothesis, which will state that the true mean μ<μ0 or that μ>μ0.
As for the T-Test command itself, there are two ways of calling it: you may give it a list of all the sample data, or the necessary statistics about the list - its size, the mean, and the standard deviation. In either case, you can indicate what the alternate hypothesis is, by a value of 0, -1, or 1 for the alternative argument. 0 indicates a two-sided hypothesis of μ≠μ0, -1 indicates μ<μ0, and 1 indicates μ>μ0. (in fact, any negative argument will be treated as -1, and any positive argument as 1)
Although you can access the T-Test command on the home screen, via the catalog, there's no need: the T-Test… interactive solver, found in the statistics menu, is much more intuitive to use - you don't have to memorize the syntax.
In either case, it's important to understand the output of T-Test. Here are the meanings of each line:
- The first line, involving μ, is the alternative hypothesis.
- t is the test statistic, the standardized difference between the sample mean and μ0. If the null hypothesis is true, it should be close to 0.
- p is the probability that the difference between the sample mean and μ0 would occur if the null hypothesis is true. When the value is sufficiently small, we reject the null hypothesis and conclude that the alternative hypothesis is true. You should have a cutoff value ready, such as 5% or 1%. If p is lower, you "reject the null hypothesis on a 5% (or 1%) level" in technical terms.
- x-bar is the sample mean.
- Sx is the sample standard deviation.
- n is the sample size (not included, but also important, is df, the degrees of freedom, defined as n-1)
Sample Problem
According to M&M's advertising, each standard-size bag of M&M's contains an average of 10 blue M&M's. You think that this estimate is low, and that the true average is higher. You decide to test this hypothesis by buying thirty bags of M&M's. You count the number of blue M&M's in each, and store this number to L1.
The value of μ0 is 10, because you want to test the null hypothesis that there are on average 10 blue M&M's per bag. We want to test the values in L1. Because we want to test if there's actually more than 10 blue M&M's per bag, we have a one-sided alternate hypothesis: μ>μ0, which corresponds to an argument of 1. To solve the problem, you'd use this code:
:T-Test 10,L1,1
Alternatively, you could calculate the mean, standard deviation, and size of your sample, and put those into the command instead. The sample size is 30; let's suppose that the mean was 11.2 and the standard deviation 1.3. The code you'd use is:
:T-Test 10,11.2,1.3,30,1
You will see the following output:
T-Test
μ>10
z=5.055900531
p=1.0857768e-5
x=11.2
Sx=1.3
n=30
The most important part of this output is "p=1.0857768e-5". This value of p is much smaller than 1% or 0.01; it's in fact around 0.00001. This is significant on the 1% level, so we reject the null hypothesis and conclude that the alternative hypothesis is true: μ>10, that is, the average number of blue M&M's in a bag is more than 10.
Advanced Uses
The final argument of T-Test, draw?, will display the results in a graphical manner if you put in "1" for it. The calculator will draw the Student's t distribution with the correct degrees of freedom, and shade the area of the graph beyond the t statistic. In addition, the value of t and the value of p will be displayed (the value of p corresponds to the shaded area). You would make your conclusions in the same way as for the regular output.
As with most other statistical commands, you may use a frequency list in your input (when using the data list syntax).
Optimization
Most of the arguments of the T-Test command have default values, and the argument can be omitted if this value is accepted.
- The draw? argument can be omitted if you don't want graphical output, although you could put "0" in as well.
- If the draw? argument is omitted, you can omit the alternative argument to use a two-sided test (μ≠μ0). If you include the draw? argument, you have to include this - otherwise there will be confusion as to what the 5th argument means.
- With data list input, you can always omit the frequency list if you won't be using it.
- With data list input, if the draw? and alternative arguments are omitted, and your data is in L1, you may omit L1 as well. However, if alternative or draw? is present, you have to include it, or else the syntax may be confused with the syntax for summary stats input.
The code in the sample problem above can't be optimized, because the alternative argument is 1:
::T-Test 10,L1,1
However, if we were doing a two-sided test, we could omit the alternative and the list arguments (since we're testing L1):
:T-Test 10,L1,0
can be
:T-Test 10
Related Commands
Source: parts of this page were written by the following TI|BD contributors: burr, DarkerLine, GoVegan.
History
| Calculator | OS Version | Description |
|---|---|---|
| TI-83 | 0.01013 | Added |
Created: February 23, 2023 23:15:01